Agile Visor V3.5 - Threat Detector
Bear witness to the most advanced, lightweight, and dramatic visor design I have produced to date, and the very first split frame Agile Visor, the Threat Detector
This headset features a lightweight angled frame with transparent, prismatic light channels, and a skeletonized eyepiece armature for maximum situational awareness. The 5 body LEDs have been positioned and angled to illuminate both internal electronics, external artwork panels, and your dazzling visage. The electronic components are fully visible behind clear window panels, with internal and external LED illumination.
LED tech:
- Body and eyepiece LEDs are Full RGB and you can select any colour you desire by adjusting the three RGB dials using a 1.5mm PH driver (supplied)
- The LED neon filament is a Single Colour, available either in Blue, Red, or Acid green. Please choose your color when submitting your order. Brightness is also adjustable using a 1.5mm PH driver. This led bar can be swapped or replaced at home using the supplied 1.5mm hex key to remove the top shell.
(Unfortunately, RGB LED filament does not yet exist)
Hardware features:
- 60mAh rechargeable battery, charge via USB C
- Can be attached to the provided steel headband, or attached directly to your existing glasses
- Eyepiece is removable and swappable, and is compatible with all previous Agile Visor eyepieces
LED Neon Care notes:
The single color LED Neon filaments are constructed from a glass core, surrounded with protective silicone.
It comes protected behind a removable acrylic barrier piece, that should shield it from most accidental impacts. They are removable if you want a cleaner look for a photoshoot, however it is recommended to leave these in place whenever possible.
If removing these protectors, or swapping the LED Filament, as the glass filament can be snapped easily if handled incorrectly.
Fortunately replacements are very cheap, if you need to source a replacement, or wish to swap in a different color filament, please search AliExpress or other online retailers for "LED filament", make sure to select either 26mm or 29mm and 3V, you will find a wide variety of sellers and options.
For example: AliExpress 26mm 3V LED filament
Included in payload:
- Left and right side headset
- 2x eyepieces with mounting hardware
- 1.5mm PH micro screwdriver to adjust RGB
- 1.5mm hex key for installing eyepiece or swapping LED Neon
- 5mm steel headband
- 4x zip ties for affixing visors to headband, or to your own eyewear
*please note model wears other cyberpunk accessories, this page is for the eyewear only
Important care instructions:
This item is for fashion only, and is not waterproof.
While efforts have been made to resist water, this should not be relied upon, please avoid getting it wet.
Manuracturing
All wearable electronics products are manufactured from FR4 PCB with SMT Assembly.
All products include laser cut acrylic components
All products are designed and manufactured in Melbourne Australia, using components ordered from local and international suppliers.
International delivery
Express delivery is available for both Australia and International destinations
Due to assembly, there may be a lead time of up to 7 days prior to shipping.
All orders are shipped with anti static sealed envelopes, inside custom bubble mailers.
Delicate items are shipped on laser cut EVA foam cassettes for protection
Support & Returns
All orders include 30 days change of mind return policy, as long as the internal anti static envelope remains sealed
All products include operational and diagnostic support, please reach out to us if you need assistance operating your device
All products include 1 year repair warranty, not including accidental damage.
Accidental damage repairs are available for a fee, please reach out to us if you need assistance with a repair.